Describes small distance detween hole and edge issues found during sheet metal design analysis. More...

Inheritance diagram for cadex.DFMSheetMetal_SmallDistanceBetweenHoleAndEdgeIssue:

Public Member Functions
	DFMSheetMetal_SmallDistanceBetweenHoleAndEdgeIssue (global::System.IntPtr cPtr, bool cMemoryOwn)

	DFMSheetMetal_SmallDistanceBetweenHoleAndEdgeIssue ()
	Constructor.

	DFMSheetMetal_SmallDistanceBetweenHoleAndEdgeIssue (cadex.SheetMetal_Hole theHole, cadex.ModelData.Edge theEdge)
	Constructor.

cadex.SheetMetal_Hole	Hole ()

void	SetHole (cadex.SheetMetal_Hole theHole)

cadex.ModelData.Edge	Edge ()

void	SetEdge (cadex.ModelData.Edge theEdge)

Public Member Functions inherited from cadex.DFMSheetMetal_SmallDistanceBetweenFeaturesIssue
	DFMSheetMetal_SmallDistanceBetweenFeaturesIssue (global::System.IntPtr cPtr, bool cMemoryOwn)

double	ExpectedMinDistanceBetweenFeaturesToSheetThicknessRatio ()

void	SetExpectedMinDistanceBetweenFeaturesToSheetThicknessRatio (double theRatio)

double	ExpectedMinDistanceBetweenFeatures ()

double	ActualDistanceBetweenFeatures ()

void	SetActualDistanceBetweenFeatures (double theDistance)

double	ActualSheetThickness ()

void	SetActualSheetThickness (double theThickness)

Public Member Functions inherited from cadex.DFMBase_Issue
	DFMBase_Issue (global::System.IntPtr cPtr, bool cMemoryOwn)

Public Member Functions inherited from cadex.MTKBase_Feature
	MTKBase_Feature (global::System.IntPtr cPtr, bool cMemoryOwn)

void	Dispose ()

	MTKBase_Feature ()
	Constructor.

void	Nullify ()

bool	IsNull ()

bool	IsEqual (cadex.MTKBase_Feature theObject)

bool	IsNotEqual (cadex.MTKBase_Feature theObject)

Static Public Member Functions
static new bool	CompareType (cadex.MTKBase_Feature theFeature)
	Returns true if theFeature is a small distance between hole and edge issue.

static new cadex.DFMSheetMetal_SmallDistanceBetweenHoleAndEdgeIssue	Cast (cadex.MTKBase_Feature theBase)

Static Public Member Functions inherited from cadex.DFMSheetMetal_SmallDistanceBetweenFeaturesIssue
static new bool	CompareType (cadex.MTKBase_Feature theFeature)
	Returnstrue if theFeature is a DFM sheet metal small distance issue.

static new cadex.DFMSheetMetal_SmallDistanceBetweenFeaturesIssue	Cast (cadex.MTKBase_Feature theBase)

Static Public Member Functions inherited from cadex.DFMBase_Issue
static bool	CompareType (cadex.MTKBase_Feature theFeature)
	Returnstrue if theFeature is a DFM issue.

static cadex.DFMBase_Issue	Cast (cadex.MTKBase_Feature theBase)

Protected Member Functions
override void	Dispose (bool disposing)

Detailed Description

Describes small distance detween hole and edge issues found during sheet metal design analysis.

When a hole is drilled too close to the edge of a sheet metal part, it can create stress concentration in the metal around the hole. The stress concentration is caused by the abrupt change in geometry at the edge of the hole, which can cause the metal to deform, crack, or even fail. This can be especially problematic in parts that will experience high loads or stress, as it can compromise the integrity of the part and its ability to perform its intended function.

Contains simple hole and part's edge, distance between which fails the following condition:

\[ \large Dist \geq T \times Rt \]

\[ \begin{aligned} & \small Dist - \text{actual distance between hole and edge} \\ & \small T - \text{actual thickness} \\ & \small Rt - \text{expected minimum distance between hole and edge to sheet thickness ratio} \end{aligned} \]

Note: This issue can contain only SheetMetal_Hole objects and NOT SheetMetal_ComplexHole. Because small distance between hole and edge analysis carried out only for simple holes (SheetMetal_Hole).

See also: DFMSheetMetal_Analyzer, DFMSheetMetal_AnalyzerParameters.MinDistanceBetweenHoleAndEdgeToSheetThicknessRatio(), SheetMetal_Hole

Examples: sheet_metal/dfm_analyzer/Program.cs, and sheet_metal/dfm_analyzer/main.cxx.

Constructor & Destructor Documentation

◆ DFMSheetMetal_SmallDistanceBetweenHoleAndEdgeIssue()

cadex.DFMSheetMetal_SmallDistanceBetweenHoleAndEdgeIssue.DFMSheetMetal_SmallDistanceBetweenHoleAndEdgeIssue	(	cadex.SheetMetal_Hole	theHole,
		cadex.ModelData.Edge	theEdge )

inline

Constructor.

Creates a small distance detween hole and edge issues from SheetMetal_Hole and ModelData.Edge objects.

Member Function Documentation

◆ Dispose()

override void cadex.DFMSheetMetal_SmallDistanceBetweenHoleAndEdgeIssue.Dispose ( bool disposing )

inlineprotectedvirtual

Reimplemented from cadex.DFMSheetMetal_SmallDistanceBetweenFeaturesIssue.

◆ Edge()

cadex.ModelData.Edge cadex.DFMSheetMetal_SmallDistanceBetweenHoleAndEdgeIssue.Edge ( )

inline

Returns the edge of analyzed part.

See also: SetEdge()

◆ Hole()

cadex.SheetMetal_Hole cadex.DFMSheetMetal_SmallDistanceBetweenHoleAndEdgeIssue.Hole ( )

inline

Returns the problematic sheet metal hole.

See also: SetHole()

◆ SetEdge()

void cadex.DFMSheetMetal_SmallDistanceBetweenHoleAndEdgeIssue.SetEdge ( cadex.ModelData.Edge theEdge )

inline

Sets the edge.

See also: Edge()

◆ SetHole()

void cadex.DFMSheetMetal_SmallDistanceBetweenHoleAndEdgeIssue.SetHole ( cadex.SheetMetal_Hole theHole )

inline

Sets the problematic sheet metal hole.

See also: Hole()

Public Member Functions

Static Public Member Functions

Protected Member Functions

Detailed Description

Constructor & Destructor Documentation

◆ DFMSheetMetal_SmallDistanceBetweenHoleAndEdgeIssue()

Member Function Documentation

◆ Dispose()

◆ Edge()

◆ Hole()

◆ SetEdge()

◆ SetHole()