cadex.DFMSheetMetal_SmallDistanceBetweenNotchAndBendIssue Class Reference

Describes small distance detween notch and bend issues found during sheet metal design analysis. More...

Inheritance diagram for cadex.DFMSheetMetal_SmallDistanceBetweenNotchAndBendIssue:

Public Member Functions
	DFMSheetMetal_SmallDistanceBetweenNotchAndBendIssue (global::System.IntPtr cPtr, bool cMemoryOwn)
	DFMSheetMetal_SmallDistanceBetweenNotchAndBendIssue ()
	Constructor.
	DFMSheetMetal_SmallDistanceBetweenNotchAndBendIssue (cadex.SheetMetal_Notch theNotch, cadex.SheetMetal_Bend theBend)
	Creates a small distance between notch issues from SheetMetal_Notch and SheetMetal_Bend objects.
cadex.SheetMetal_Notch	Notch ()
	Returns the problematic sheet metal notch.
void	SetNotch (cadex.SheetMetal_Notch theNotch)
	Sets the problematic sheet metal notch.
cadex.SheetMetal_Bend	Bend ()
	Returns the problematic sheet metal bend.
void	SetBend (cadex.SheetMetal_Bend theBend)
	Sets the problematic sheet metal bend.
Public Member Functions inherited from cadex.DFMSheetMetal_SmallDistanceBetweenFeaturesIssue
	DFMSheetMetal_SmallDistanceBetweenFeaturesIssue (global::System.IntPtr cPtr, bool cMemoryOwn)
double	ExpectedMinDistanceBetweenFeaturesToSheetThicknessRatio ()
	Returns expected minimum distance between features to sheet thickness ratio.
void	SetExpectedMinDistanceBetweenFeaturesToSheetThicknessRatio (double theRatio)
	Sets expected distance between features to sheet thickness ratio.
double	ExpectedMinDistanceBetweenFeatures ()
	Returns expected minimum distance between features in mm .
double	ActualDistanceBetweenFeatures ()
	Returns the actual distance between features in mm .
void	SetActualDistanceBetweenFeatures (double theDistance)
	Sets the actual distance between features in mm.
double	ActualSheetThickness ()
	Returns the actual sheet thickness of analyzed part in mm .
void	SetActualSheetThickness (double theThickness)
	Sets the actual sheet thickness in mm.
Public Member Functions inherited from cadex.DFMBase_Issue
	DFMBase_Issue (global::System.IntPtr cPtr, bool cMemoryOwn)
Public Member Functions inherited from cadex.MTKBase_Feature
	MTKBase_Feature (global::System.IntPtr cPtr, bool cMemoryOwn)
void	Dispose ()
	MTKBase_Feature ()
	Constructor.
void	Nullify ()
	Resets reference to implementation object.
bool	IsNull ()
	Returns true if the object is nullified.
bool	IsEqual (cadex.MTKBase_Feature theObject)
bool	IsNotEqual (cadex.MTKBase_Feature theObject)

Static Public Member Functions
static new bool	CompareType (cadex.MTKBase_Feature theFeature)
	Returns true if theFeature is a small distance between notch and bend issue.
static new cadex.DFMSheetMetal_SmallDistanceBetweenNotchAndBendIssue	Cast (cadex.MTKBase_Feature theBase)
Static Public Member Functions inherited from cadex.DFMSheetMetal_SmallDistanceBetweenFeaturesIssue
static new bool	CompareType (cadex.MTKBase_Feature theFeature)
	Returnstrue if theFeature is a DFM sheet metal small distance issue.
static new cadex.DFMSheetMetal_SmallDistanceBetweenFeaturesIssue	Cast (cadex.MTKBase_Feature theBase)
Static Public Member Functions inherited from cadex.DFMBase_Issue
static bool	CompareType (cadex.MTKBase_Feature theFeature)
	Returnstrue if theFeature is a DFM issue.
static cadex.DFMBase_Issue	Cast (cadex.MTKBase_Feature theBase)

Protected Member Functions
override void	Dispose (bool disposing)

Detailed Description

Describes small distance detween notch and bend issues found during sheet metal design analysis.

When the distance between these two features is too small, it can lead to a number of issues during the manufacturing process. For example, when a sheet metal component is bent, the metal is stretched and compressed, which can cause it to deform or even crack. If there is a notch too close to the bend, it can create a stress concentration point that can exacerbate this problem.

Contains notch and bend, distance between which fails the following condition:

\[ \large Dist \geq T \times Rt \]

\[ \begin{aligned} & \small Dist - \text{actual distance between notch and bend} \\ & \small T - \text{actual thickness} \\ & \small Rt - \text{expected minimum distance between notch and bend to sheet thickness ratio} \end{aligned} \]

See also

DFMSheetMetal_Analyzer, DFMSheetMetal_AnalyzerParameters.MinDistanceBetweenNotchAndBendToSheetThicknessRatio(), SheetMetal_Notch, SheetMetal_Bend

Examples

sheet_metal/dfm_analyzer/Program.cs, and sheet_metal/dfm_analyzer/main.cxx.

Constructor & Destructor Documentation

DFMSheetMetal_SmallDistanceBetweenNotchAndBendIssue() [1/2]

cadex.DFMSheetMetal_SmallDistanceBetweenNotchAndBendIssue.DFMSheetMetal_SmallDistanceBetweenNotchAndBendIssue ( )

inline

Constructor.

DFMSheetMetal_SmallDistanceBetweenNotchAndBendIssue() [2/2]

cadex.DFMSheetMetal_SmallDistanceBetweenNotchAndBendIssue.DFMSheetMetal_SmallDistanceBetweenNotchAndBendIssue ( cadex.SheetMetal_Notch theNotch, cadex.SheetMetal_Bend theBend )

inline

Creates a small distance between notch issues from SheetMetal_Notch and SheetMetal_Bend objects.

Constructor.

Member Function Documentation

Bend()

cadex.SheetMetal_Bend cadex.DFMSheetMetal_SmallDistanceBetweenNotchAndBendIssue.Bend ( )

inline

Returns the problematic sheet metal bend.

See also

SetBend()

CompareType()

static new bool cadex.DFMSheetMetal_SmallDistanceBetweenNotchAndBendIssue.CompareType ( cadex.MTKBase_Feature theFeature )

inlinestatic

Returns true if theFeature is a small distance between notch and bend issue.

Examples

sheet_metal/dfm_analyzer/Program.cs.

Dispose()

override void cadex.DFMSheetMetal_SmallDistanceBetweenNotchAndBendIssue.Dispose ( bool disposing )

inlineprotectedvirtual

Reimplemented from cadex.DFMSheetMetal_SmallDistanceBetweenFeaturesIssue.

Notch()

cadex.SheetMetal_Notch cadex.DFMSheetMetal_SmallDistanceBetweenNotchAndBendIssue.Notch ( )

inline

Returns the problematic sheet metal notch.

See also

SetNotch()

SetBend()

void cadex.DFMSheetMetal_SmallDistanceBetweenNotchAndBendIssue.SetBend ( cadex.SheetMetal_Bend theBend )

inline

Sets the problematic sheet metal bend.

See also

Bend()

SetNotch()

void cadex.DFMSheetMetal_SmallDistanceBetweenNotchAndBendIssue.SetNotch ( cadex.SheetMetal_Notch theNotch )

inline

Sets the problematic sheet metal notch.

See also

Notch()