Describes irregular depth extruded hole issue found during sheet metal design analysis. More...

Inheritance diagram for cadex::DFMSheetMetal_IrregularDepthExtrudedHoleIssue:

Public Member Functions
	DFMSheetMetal_IrregularDepthExtrudedHoleIssue ()
	Constructor.

	DFMSheetMetal_IrregularDepthExtrudedHoleIssue (const SheetMetal_ComplexHole &theHole)
	Constructor.

double	ExpectedMinExtrudedHeightToSheetThicknessRatio () const
	Returns the expected minimum extrude height to sheet thickness ratio.

void	SetExpectedMinExtrudedHeightToSheetThicknessRatio (double theRatio)
	Sets the expected minimum extrude height to sheet thickness ratio.

double	ExpectedMaxExtrudedHeightToInnerDiameterRatio () const
	Returns the expected maximum extrude height to inner diameter ratio.

void	SetExpectedMaxExtrudedHeightToInnerDiameterRatio (double theRatio)
	Sets the expected maximum extrude height to inner diameter ratio.

double	ExpectedMinExtrudedHeight () const
	Returns expected minimum hole extrude height in mm .

double	ExpectedMaxExtrudedHeight () const
	Returns expected maximum hole extrude height in mm .

double	ActualExtrudedHeight () const
	Returns actual hole extrude height in mm .

Public Member Functions inherited from cadex::DFMSheetMetal_HoleIssue
SheetMetal_Hole	SheetMetalHole () const
	Returns the problematic sheet metal hole.

double	ActualSheetThickness () const
	Returns the actual sheet thickness of analyzed part in mm .

void	SetActualSheetThickness (double theThickness)
	Sets the actual sheet thickness in mm. theThickness should be greater than zero.

Public Member Functions inherited from cadex::DFMBase_HoleIssue
const MTKBase_Hole &	Hole () const
	Returns the problematic hole.

void	SetHole (const MTKBase_Hole &theHole)
	Sets the problematic hole.

Public Member Functions inherited from cadex::MTKBase_Feature
	MTKBase_Feature ()
	Constructor.

	~MTKBase_Feature ()
	Destructor.

void	Nullify ()
	Resets reference to implementation object.

bool	IsNull () const
	Returns true if the object is nullified.

	operator bool () const
	Casts the object to the bool type.

template<typename T >
bool	IsOfType () const

ImplType *	Impl () const

template<typename T >
T *	Impl () const
	Reserved for internal use.

bool	operator== (const MTKBase_Feature &theObject) const

bool	operator!= (const MTKBase_Feature &theObject) const

Static Public Member Functions
static bool	CompareType (const MTKBase_Feature &theFeature)
	Returns true if theFeature is a irregular depth extruded hole issue.

Static Public Member Functions inherited from cadex::DFMSheetMetal_HoleIssue
static bool	CompareType (const MTKBase_Feature &theFeature)
	Returnstrue if theFeature is a DFM sheet metal hole issue.

Static Public Member Functions inherited from cadex::DFMBase_HoleIssue
static bool	CompareType (const MTKBase_Feature &theFeature)
	Returnstrue if theFeature is a DFM hole issue.

Static Public Member Functions inherited from cadex::DFMBase_Issue
static bool	CompareType (const MTKBase_Feature &theFeature)
	Returnstrue if theFeature is a DFM issue.

Additional Inherited Members
Public Types inherited from cadex::DFMSheetMetal_HoleIssue
typedef cadex::internal::DFMSheetMetalImpl_HoleIssue	ImplType

typedef std::shared_ptr< ImplType >	ImplPtrType

Public Types inherited from cadex::DFMBase_HoleIssue
typedef cadex::internal::DFMBaseImpl_HoleIssue	ImplType

typedef std::shared_ptr< ImplType >	ImplPtrType

Public Types inherited from cadex::DFMBase_Issue
typedef cadex::internal::DFMBaseImpl_Issue	ImplType

typedef std::shared_ptr< ImplType >	ImplPtrType

Public Types inherited from cadex::MTKBase_Feature
typedef cadex::internal::MTKBaseImpl_Feature	ImplType

typedef std::shared_ptr< ImplType >	ImplPtrType

Protected Member Functions inherited from cadex::DFMSheetMetal_HoleIssue
	DFMSheetMetal_HoleIssue (ImplPtrType theImpl)
	Reserved for internal use.

Protected Member Functions inherited from cadex::DFMBase_HoleIssue
	DFMBase_HoleIssue (ImplPtrType theImpl)
	Reserved for internal use.

Protected Member Functions inherited from cadex::DFMBase_Issue
	DFMBase_Issue (ImplPtrType theImpl)
	Reserved for internal use.

Protected Member Functions inherited from cadex::MTKBase_Feature
	MTKBase_Feature (ImplPtrType theImpl)
	Reserved for internal use.

Protected Attributes inherited from cadex::MTKBase_Feature
ImplPtrType	myImpl

Detailed Description

Describes irregular depth extruded hole issue found during sheet metal design analysis.

Irregular Depth Extruded Hole issue in sheet metal refers to a problem where the depth of an extruded hole is not consistent or uniform. This issue can bring about a weakened structure, compromised integrity, and difficulties in assembly.

Contains complex hole that fails one of the following conditions:

\[ \large ExtrH_h \geq T \times Rt \]

\[ \begin{aligned} & \small ExtrH_h - \text{analyzed hole extrude height} \\ & \small T - \text{thickness of analyzed sheet} \\ & \small Rt - \text{minimum hole extruded height to sheet thickness ratio} \end{aligned} \]

\[ \large ExtrH_h \leq ID \times Rt \]

\[ \begin{aligned} & \small ExtrH_h - \text{analyzed hole extrude height} \\ & \small ID - \text{analyzed hole inner diameter} \\ & \small Rt - \text{maximum hole extrude height to inner diameter ratio} \end{aligned} \]

See also: DFMSheetMetal_Analyzer, DFMSheetMetal_AnalyzerParameters.MinHoleExtrudedHeightToSheetThicknessRatio(), DFMSheetMetal_AnalyzerParameters.MaxHoleExtrudedHeightToInnerDiameterRatio(), SheetMetal_ComplexHole

Examples: sheet_metal/dfm_analyzer/Program.cs, and sheet_metal/dfm_analyzer/main.cxx.

Constructor & Destructor Documentation

◆ DFMSheetMetal_IrregularDepthExtrudedHoleIssue() [1/2]

cadex::DFMSheetMetal_IrregularDepthExtrudedHoleIssue::DFMSheetMetal_IrregularDepthExtrudedHoleIssue ( )

Constructor.

◆ DFMSheetMetal_IrregularDepthExtrudedHoleIssue() [2/2]

cadex::DFMSheetMetal_IrregularDepthExtrudedHoleIssue::DFMSheetMetal_IrregularDepthExtrudedHoleIssue ( const SheetMetal_ComplexHole & theHole )

Constructor.

Creates an extruded hole with irregular depth issue from SheetMetal_ComplexHole object.

Member Function Documentation

◆ ActualExtrudedHeight()

double cadex::DFMSheetMetal_IrregularDepthExtrudedHoleIssue::ActualExtrudedHeight ( ) const

Returns actual hole extrude height in mm .

See also: Hole()

Examples: sheet_metal/dfm_analyzer/Program.cs.

◆ CompareType()

bool cadex::DFMSheetMetal_IrregularDepthExtrudedHoleIssue::CompareType ( const MTKBase_Feature & theFeature )

static

Returns true if theFeature is a irregular depth extruded hole issue.

Examples: sheet_metal/dfm_analyzer/Program.cs.

◆ ExpectedMaxExtrudedHeight()

double cadex::DFMSheetMetal_IrregularDepthExtrudedHoleIssue::ExpectedMaxExtrudedHeight ( ) const

Returns expected maximum hole extrude height in mm .

\[ \large EH_e = T \times Rt \]

\[ \begin{aligned} & \small EH_e - \text{expected maximum hole extrude height} \\ & \small ID - \text{hole inner diameter} \\ & \small Rt - \text{expected maximum hole extrude height to inner diameter ratio} \end{aligned} \]

See also: ExpectedMaxExtrudedHeightToInnerDiameterRatio(), MTKBase_Hole::Radius()

Examples: sheet_metal/dfm_analyzer/Program.cs.

◆ ExpectedMaxExtrudedHeightToInnerDiameterRatio()

double cadex::DFMSheetMetal_IrregularDepthExtrudedHoleIssue::ExpectedMaxExtrudedHeightToInnerDiameterRatio ( ) const

Returns the expected maximum extrude height to inner diameter ratio.

See also: SetExpectedMaxExtrudedHeightToInnerDiameterRatio(), DFMSheetMetal_AnalyzerParameters.MaxExtrudedHeightToInnerDiameterRatio()

◆ ExpectedMinExtrudedHeight()

double cadex::DFMSheetMetal_IrregularDepthExtrudedHoleIssue::ExpectedMinExtrudedHeight ( ) const

Returns expected minimum hole extrude height in mm .

\[ \large EH_e = T \times Rt \]

\[ \begin{aligned} & \small EH_e - \text{expected minimum hole extrude height} \\ & \small T - \text{actual sheet thickness} \\ & \small Rt - \text{expected minimum extrude height to sheet thickness ratio} \end{aligned} \]

See also: ExpectedMinExtrudedHeightToSheetThicknessRatio(), ActualSheetThickness()

Examples: sheet_metal/dfm_analyzer/Program.cs.

◆ ExpectedMinExtrudedHeightToSheetThicknessRatio()

double cadex::DFMSheetMetal_IrregularDepthExtrudedHoleIssue::ExpectedMinExtrudedHeightToSheetThicknessRatio ( ) const

Returns the expected minimum extrude height to sheet thickness ratio.

See also: SetExpectedMinExtrudedHeightToSheetThicknessRatio, DFMSheetMetal_AnalyzerParameters.MinExtrudedHeightToSheetThicknessRatio()

◆ SetExpectedMaxExtrudedHeightToInnerDiameterRatio()

void cadex::DFMSheetMetal_IrregularDepthExtrudedHoleIssue::SetExpectedMaxExtrudedHeightToInnerDiameterRatio ( double theRatio )

Sets the expected maximum extrude height to inner diameter ratio.

theRatio should be greater than zero.

See also: ExpectedMaxExtrudedHeightToInnerDiameterRatio()

◆ SetExpectedMinExtrudedHeightToSheetThicknessRatio()

void cadex::DFMSheetMetal_IrregularDepthExtrudedHoleIssue::SetExpectedMinExtrudedHeightToSheetThicknessRatio ( double theRatio )

Sets the expected minimum extrude height to sheet thickness ratio.