sheet_metal/dfm_analyzer/Program.cs

Refer to the Sheet Metal DFM Analyzer Example

feature_group.cs

// ****************************************************************************
// $Id$
//
// Copyright (C) 2008-2014, Roman Lygin. All rights reserved.
// Copyright (C) 2014-2025, CADEX. All rights reserved.
//
// This file is part of the Manufacturing Toolkit software.
//
// You may use this file under the terms of the BSD license as follows:
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are met:
// * Redistributions of source code must retain the above copyright notice,
//   this list of conditions and the following disclaimer.
// * Redistributions in binary form must reproduce the above copyright notice,
//   this list of conditions and the following disclaimer in the documentation
//   and/or other materials provided with the distribution.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
// AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
// IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
// ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
// LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
// CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
// SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
// INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
// CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
// ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
// POSSIBILITY OF SUCH DAMAGE.
//
// ****************************************************************************
 
using cadex;
using System;
using System.Collections.Generic;
 
using FeatureMapType = System.Collections.Generic.SortedDictionary<cadex.MTKBase_Feature, uint>;
 
namespace feature_group
{
    class FeatureComparer : IComparer<MTKBase_Feature>
    {
        public int Compare(MTKBase_Feature theA, MTKBase_Feature theB)
        {
            MTKBase_FeatureComparator aComparator = new MTKBase_FeatureComparator();
            bool anALessThanB = aComparator.Apply(theA, theB);
            if (anALessThanB)
            {
                return -1;
            }
            bool aBLessThanA = aComparator.Apply(theB, theA);
            if (aBLessThanA)
            {
                return 1;
            }
            return 0;
        }
    }
 
    public struct Pair
    {
        public Pair(double theFirst, double theSecond)
        {
            First = theFirst;
            Second = theSecond;
        }
 
        public double First { get; }
        public double Second { get; }
 
        public override string ToString() => $"{First} x {Second}";
    }
 
    public struct Dimension
    {
        public Dimension(double theL, double theW, double theD)
        {
            L = theL;
            W = theW;
            D = theD;
        }
 
        public double L { get; }
        public double W { get; }
        public double D { get; }
 
        public override string ToString() => $"{L} x {W} x {D}";
    }
 
    public struct Direction
    {
        public Direction(double theX, double theY, double theZ)
        {
            X = theX;
            Y = theY;
            Z = theZ;
        }
 
        public double X { get; }
        public double Y { get; }
        public double Z { get; }
 
        public override string ToString() => $"({FormattedString(X)}, {FormattedString(Y)}, {FormattedString(Z)})";
 
        private string FormattedString(double theValue)
        {
            System.Globalization.CultureInfo aCI = new System.Globalization.CultureInfo("en-US");
            return string.Format(aCI, "{0:0.00}", theValue);
        }
    }
 
    class FeatureGroupManager
    {
        public FeatureGroupManager()
        {
            myGroups = new List<FeatureGroup>();
        }
 
        private class FeatureGroup
        {
            public FeatureGroup(string theName, string theSubgroupName, bool theHasParameters)
            {
                myName = theName;
                mySubgroupName = theSubgroupName;
                myHasParameters = theHasParameters;
                myFeatureSubgroups = new FeatureMapType(new FeatureComparer());
            }
 
            public uint FeatureCount()
            {
                uint aCount = 0;
                foreach (var i in myFeatureSubgroups)
                {
                    aCount += i.Value;
                }
                return aCount;
            }
 
            public string myName;
            public string mySubgroupName;
            public bool myHasParameters;
            public FeatureMapType myFeatureSubgroups;
        }
 
        private class FeatureGroupComparer : IComparer<FeatureGroup>
        {
            public int Compare(FeatureGroup theA, FeatureGroup theB)
            {
                string anAName = theA.myName;
                string aBName = theB.myName;
                if (anAName == aBName)
                {
                    return 0;
                }
 
                FeatureMapType anAFeatureSubgroups = theA.myFeatureSubgroups;
                FeatureMapType aBFeatureSubgroups = theB.myFeatureSubgroups;
                if (anAFeatureSubgroups.Count == 0 || aBFeatureSubgroups.Count == 0)
                {
                    return anAName.CompareTo(aBName);
                }
 
                MTKBase_Feature anAFeature = new MTKBase_Feature();
                MTKBase_Feature aBFeature = new MTKBase_Feature();
                foreach (var i in anAFeatureSubgroups)
                {
                    anAFeature = i.Key;
                    break;
                }
                foreach (var i in aBFeatureSubgroups)
                {
                    aBFeature = i.Key;
                    break;
                }
 
                FeatureComparer aFeatureComparator = new FeatureComparer();
                return aFeatureComparator.Compare(anAFeature, aBFeature);
            }
        }
 
        private List<FeatureGroup> myGroups;
 
        public void AddFeature(string theGroupName, string theSubgroupName, bool theHasParameters, MTKBase_Feature theFeature)
        {
            //find or create
            int aRes = myGroups.FindIndex(theGroup => theGroup.myName == theGroupName);
            if (aRes == -1)
            {
                myGroups.Add(new FeatureGroup(theGroupName, theSubgroupName, theHasParameters));
                aRes = myGroups.Count - 1;
            }
 
            //update
            FeatureGroup aGroup = myGroups[aRes];
            FeatureMapType aSubgroups = aGroup.myFeatureSubgroups;
            if (aSubgroups.ContainsKey(theFeature))
            {
                ++aSubgroups[theFeature];
            }
            else
            {
                aSubgroups[theFeature] = 1;
            }
        }
 
        public void Print(string theFeatureType, Action<MTKBase_Feature> thePrintFeatureParameters)
        {
            myGroups.Sort(new FeatureGroupComparer());
 
            uint aTotalCount = 0;
            foreach (var i in myGroups)
            {
                uint aFeatureCount = i.FeatureCount();
                aTotalCount += aFeatureCount;
 
                Console.WriteLine($"    {i.myName}: {aFeatureCount}");
 
                if (!i.myHasParameters)
                {
                    continue;
                }
 
                string aSubgroupName = i.mySubgroupName;
                foreach (var j in i.myFeatureSubgroups)
                {
                    Console.WriteLine($"        {j.Value} {aSubgroupName} with");
                    thePrintFeatureParameters(j.Key);
                }
            }
 
            Console.WriteLine($"\n    Total {theFeatureType}: {aTotalCount}\n");
        }
 
        public static void PrintFeatureParameter<T>(string theName, T theValue, string theUnits)
        {
            Console.WriteLine($"          {theName}: {theValue} {theUnits}");
        }
    }
}

shape_processor.cs

// ****************************************************************************
// $Id$
//
// Copyright (C) 2008-2014, Roman Lygin. All rights reserved.
// Copyright (C) 2014-2025, CADEX. All rights reserved.
//
// This file is part of the Manufacturing Toolkit software.
//
// You may use this file under the terms of the BSD license as follows:
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are met:
// * Redistributions of source code must retain the above copyright notice,
//   this list of conditions and the following disclaimer.
// * Redistributions in binary form must reproduce the above copyright notice,
//   this list of conditions and the following disclaimer in the documentation
//   and/or other materials provided with the distribution.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
// AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
// IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
// ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
// LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
// CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
// SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
// INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
// CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
// ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
// POSSIBILITY OF SUCH DAMAGE.
//
// ****************************************************************************
 
using System;
using cadex;
using cadex.ModelData;
 
namespace shape_processor
{
    abstract class ShapeProcessor : ModelElementVoidVisitor
    {
        public override void Apply(Part thePart)
        {
            var aPartName = thePart.Name().IsEmpty() ? new UTF16String("noname") : thePart.Name();
 
            var aBodyVec = thePart.Bodies();
            if (aBodyVec.Count != 0)
            {
                // Looking for a suitable body
                for (int i = 0; i < aBodyVec.Count; ++i)
                {
                    Body aBody = aBodyVec[i];
 
                    var aShapeIt = new ShapeIterator(aBody);
                    foreach (var aShape in aShapeIt)
                    {
                        if (aShape.Type() == ShapeType.Solid)
                        {
                            Console.Write($"Part #{myPartIndex} [\"{aPartName}\"] - solid #{i} has:\n");
                            ProcessSolid(Solid.Cast(aShape));
                        }
                        else if (aShape.Type() == ShapeType.Shell)
                        {
                            Console.Write($"Part #{myPartIndex} [\"{aPartName}\"] - shell #{i} has:\n");
                            ProcessShell(Shell.Cast(aShape));
                        }
                    }
 
                }
            }
            ++myPartIndex;
        }
 
        public abstract void ProcessSolid(Solid theSolid);
 
        public abstract void ProcessShell(Shell theShell);
 
        private uint myPartIndex = 0;
    }
 
    abstract class SolidProcessor : ModelElementVoidVisitor
    {
        public override void Apply(Part thePart)
        {
            var aPartName = thePart.Name().IsEmpty() ? new UTF16String("noname") : thePart.Name();
 
            var aBodyVec = thePart.Bodies();
            if (aBodyVec.Count != 0)
            {
                // Looking for a suitable body
                for (int i = 0; i < aBodyVec.Count; ++i)
                {
                    Body aBody = aBodyVec[i];
 
                    var aShapeIt = new ShapeIterator(aBody);
                    foreach (var aShape in aShapeIt)
                    {
                        if (aShape.Type() == ShapeType.Solid)
                        {
                            Console.Write($"Part #{myPartIndex} [\"{aPartName}\"] - solid #{i} has:\n");
                            ProcessSolid(Solid.Cast(aShape));
                        }
                    }
 
                }
            }
            ++myPartIndex;
        }
 
        public abstract void ProcessSolid(Solid theSolid);
 
        private uint myPartIndex = 0;
    }
 
    abstract class SolidAndMeshProcessor : ModelElementVoidVisitor
    {
        public override void Apply(Part thePart)
        {
            string aPartName = thePart.Name().IsEmpty() ? "noname" : thePart.Name().ToString();
 
            int aShapeIndex = 0;
            var aBodyVec = thePart.Bodies();
            foreach (var aBody in aBodyVec)
            {
                if(MeshBody.CompareType(aBody))
                {
                    ProcessMeshBody(MeshBody.Cast(aBody), aPartName, ref aShapeIndex);
                } else if(SolidBody.CompareType(aBody))
                {
                    Console.Write($"Part #{myPartIndex} [\"{aPartName}\"] - solid #{aShapeIndex} has:\n");
                    ProcessSolid(SolidBody.Cast(aBody).Solid(), aPartName, aShapeIndex++);
                }
            }
            ++myPartIndex;
        }
 
        public abstract void ProcessSolid(Solid theSolid, string thePartName, int theShapeIndex);
        public abstract void ProcessITS(IndexedTriangleSet theITS, string thePartName, int theShapeIndex);
 
        private void ProcessMeshBody(MeshBody theMeshBody, string thePartName, ref int theShapeIndex)
        {
            var aMeshShapes = theMeshBody.Shapes();
            foreach (var aShape in aMeshShapes)
            {
                if(IndexedTriangleSet.CompareType(aShape))
                {
                    Console.Write($"Part #{myPartIndex} [\"{thePartName}\"]  #{theShapeIndex}:\n");
                    ProcessITS(IndexedTriangleSet.Cast(aShape), thePartName, theShapeIndex++);
                }
            }
        }
 
        protected uint myPartIndex = 0;
    }
}

Program.cs

// ****************************************************************************
// $Id$
//
// Copyright (C) 2008-2014, Roman Lygin. All rights reserved.
// Copyright (C) 2014-2025, CADEX. All rights reserved.
//
// This file is part of the Manufacturing Toolkit software.
//
// You may use this file under the terms of the BSD license as follows:
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are met:
// * Redistributions of source code must retain the above copyright notice,
//   this list of conditions and the following disclaimer.
// * Redistributions in binary form must reproduce the above copyright notice,
//   this list of conditions and the following disclaimer in the documentation
//   and/or other materials provided with the distribution.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
// AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
// IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
// ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
// LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
// CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
// SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
// INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
// CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
// ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
// POSSIBILITY OF SUCH DAMAGE.
//
// ****************************************************************************
 
using cadex;
using cadex.ModelData;
using feature_group;
using shape_processor;
using System;
 
namespace dfm_analyzer
{
    class Program
    {
        static int Main(string[] args)
        {
            string aKey = MTKLicenseKey.Value();
 
            // Activate the license (the key should be defined in mtk_license.cs)
            if (!LicenseManager.Activate(aKey))
            {
                Console.WriteLine("Failed to activate Manufacturing Toolkit license.");
                return 1;
            }
 
            if (args.Length != 1)
            {
                Console.WriteLine("Usage: " +
                    $"{System.Reflection.Assembly.GetExecutingAssembly().Location} <input_file>, where:");
                Console.WriteLine($"    <input_file> is a name of the file to be read");
                return 1;
            }
 
            string aSource = args[0];
 
            var aModel = new Model();
            var aReader = new ModelReader();
 
            // Reading the file
            if (!aReader.Read(new UTF16String(aSource), aModel))
            {
                Console.WriteLine($"Failed to read the file {aSource}");
                return 1;
            }
            Console.WriteLine($"Model: {aModel.Name()}\n");
 
            var aPartProcessor = new PartProcessor();
            var aVisitor = new ModelElementUniqueVisitor(aPartProcessor);
            aModel.Accept(aVisitor);
 
            return 0;
        }
 
        class PartProcessor : ShapeProcessor
        {
            public PartProcessor()
            {
                myAnalyzer = new DFMSheetMetal_Analyzer();
            }
 
            public override void ProcessSolid(Solid theSolid)
            {
                var anIssueList = myAnalyzer.Perform(theSolid);
                PrintIssues(anIssueList);
            }
 
            public override void ProcessShell(Shell theShell)
            {
                var anIssueList = myAnalyzer.Perform(theShell);
                PrintIssues(anIssueList);
            }
 
            private DFMSheetMetal_Analyzer myAnalyzer;
        }
 
        static void PrintIssues(MTKBase_FeatureList theIssueList)
        {
            FeatureGroupManager aManager = new FeatureGroupManager();
 
            //group by parameters to provide more compact information about issues
            for (uint i = 0; i < theIssueList.Size(); ++i)
            {
                MTKBase_Feature anIssue = theIssueList.Feature(i);
                if (DFMSheetMetal_SmallRadiusBendIssue.CompareType(anIssue))
                {
                    aManager.AddFeature("Small Radius Bend Issue(s)", "Bend(s)", true, anIssue);
                }
                else if (DFMSheetMetal_SmallDiameterHoleIssue.CompareType(anIssue))
                {
                    aManager.AddFeature("Small Diameter Hole Issue(s)", "Hole(s)", true, anIssue);
                }
                else if (DFMSheetMetal_FlatPatternInterferenceIssue.CompareType(anIssue))
                {
                    aManager.AddFeature("Flat Pattern Interference Issue(s)", "", false, anIssue);
                }
                else if (DFMSheetMetal_IrregularCornerFilletRadiusNotchIssue.CompareType(anIssue))
                {
                    aManager.AddFeature("Irregular Corner Fillet Radius Notch Issue(s)", "Notch(es)", true, anIssue);
                }
                else if (DFMSheetMetal_IrregularDepthExtrudedHoleIssue.CompareType(anIssue))
                {
                    aManager.AddFeature("Irregular Depth Extruded Hole Issue(s)", "Hole(s)", true, anIssue);
                }
                else if (DFMSheetMetal_IrregularRadiusOpenHemBendIssue.CompareType(anIssue))
                {
                    aManager.AddFeature("Irregular Radius Open Hem Bend Issue(s)", "Bend(s)", true, anIssue);
                }
                else if (DFMSheetMetal_IrregularSizeBendReliefIssue.CompareType(anIssue))
                {
                    aManager.AddFeature("Irregular Size Bend Relief Issue(s)", "Bend(s)", true, anIssue);
                }
                else if (DFMSheetMetal_LargeDepthBeadIssue.CompareType(anIssue))
                {
                    aManager.AddFeature("Large Depth Bead Issue(s)", "Bead(s)", true, anIssue);
                }
                else if (DFMSheetMetal_LargeDepthCountersinkIssue.CompareType(anIssue))
                {
                    aManager.AddFeature("Large Depth Countersink Issue(s)", "Countersink(s)", true, anIssue);
                }
                else if (DFMSheetMetal_NarrowCutoutIssue.CompareType(anIssue))
                {
                    aManager.AddFeature("Narrow Cutout Issue(s)", "Cutout(s)", true, anIssue);
                }
                else if (DFMSheetMetal_SmallDepthLouverIssue.CompareType(anIssue))
                {
                    aManager.AddFeature("Small Depth Louver Issue(s)", "Louver(s)", true, anIssue);
                }
                else if (DFMSheetMetal_InconsistentRadiusBendIssue.CompareType(anIssue))
                {
                    aManager.AddFeature("Inconsistent Radius Bend Issue(s)", "Bend(s)", true, anIssue);
                }
                else if (DFMSheetMetal_SmallLengthFlangeIssue.CompareType(anIssue))
                {
                    aManager.AddFeature("Small Length Flange Issue(s)", "Flange(s)", true, anIssue);
                }
                else if (DFMSheetMetal_SmallLengthHemBendFlangeIssue.CompareType(anIssue))
                {
                    aManager.AddFeature("Small Length Hem Bend Flange Issue(s)", "Flange(s)", true, anIssue);
                }
                else if (DFMSheetMetal_IrregularSizeNotchIssue.CompareType(anIssue))
                {
                    aManager.AddFeature("Irregular Size Notch Issue(s)", "Notch(s)", true, anIssue);
                }
                else if (DFMSheetMetal_IrregularSizeTabIssue.CompareType(anIssue))
                {
                    aManager.AddFeature("Irregular Size Tab Issue(s)", "Tab(s)", true, anIssue);
                }
                else if (DFMSheetMetal_SmallDistanceBetweenFeaturesIssue.CompareType(anIssue))
                {
                    DFMSheetMetal_SmallDistanceBetweenFeaturesIssue aSDBFIssue = DFMSheetMetal_SmallDistanceBetweenFeaturesIssue.Cast(anIssue);
                    aManager.AddFeature(SmallDistanceIssueName(aSDBFIssue), "Distance(s)", true, anIssue);
                }
                else if (DFMSheetMetal_NonStandardSheetThicknessIssue.CompareType(anIssue))
                {
                    aManager.AddFeature("Non Standard Sheet Thickness Issue(s)", "Sheet Thickness(s)", true, anIssue);
                }
                else if (DFMSheetMetal_NonStandardSheetSizeIssue.CompareType(anIssue))
                {
                    aManager.AddFeature("Non Standard Sheet Size Issue(s)", "Sheet Size(s)", true, anIssue);
                }
            }
 
            //print
            Action<MTKBase_Feature> PrintFeatureParameters = theIssue =>
            {
                if (DFMSheetMetal_SmallRadiusBendIssue.CompareType(theIssue))
                {
                    DFMSheetMetal_SmallRadiusBendIssue aSRBIssue = DFMSheetMetal_SmallRadiusBendIssue.Cast(theIssue);
                    FeatureGroupManager.PrintFeatureParameter("expected min radius", aSRBIssue.ExpectedMinRadius(), "mm");
                    FeatureGroupManager.PrintFeatureParameter("actual radius", aSRBIssue.ActualRadius(), "mm");
                }
                else if (DFMSheetMetal_SmallDiameterHoleIssue.CompareType(theIssue))
                {
                    DFMSheetMetal_SmallDiameterHoleIssue aSDHIssue = DFMSheetMetal_SmallDiameterHoleIssue.Cast(theIssue);
                    FeatureGroupManager.PrintFeatureParameter("expected min diameter", aSDHIssue.ExpectedMinDiameter(), "mm");
                    FeatureGroupManager.PrintFeatureParameter("actual diameter", aSDHIssue.ActualDiameter(), "mm");
                }
                else if (DFMSheetMetal_SmallDistanceBetweenFeaturesIssue.CompareType(theIssue))
                {
                    DFMSheetMetal_SmallDistanceBetweenFeaturesIssue aSDBFIssue = DFMSheetMetal_SmallDistanceBetweenFeaturesIssue.Cast(theIssue);
                    FeatureGroupManager.PrintFeatureParameter("expected min distance", aSDBFIssue.ExpectedMinDistanceBetweenFeatures(), "mm");
                    FeatureGroupManager.PrintFeatureParameter("actual distance", aSDBFIssue.ActualDistanceBetweenFeatures(), "mm");
                }
                else if (DFMSheetMetal_FlatPatternInterferenceIssue.CompareType(theIssue))
                {
                    //no parameters
                }
                else if (DFMSheetMetal_IrregularCornerFilletRadiusNotchIssue.CompareType(theIssue))
                {
                    DFMSheetMetal_IrregularCornerFilletRadiusNotchIssue aICFRNIssue = DFMSheetMetal_IrregularCornerFilletRadiusNotchIssue.Cast(theIssue);
                    FeatureGroupManager.PrintFeatureParameter("expected corner fillet radius", aICFRNIssue.ExpectedCornerFilletRadius(), "mm");
                    FeatureGroupManager.PrintFeatureParameter("actual corner fillet radius", aICFRNIssue.ActualCornerFilletRadius(), "mm");
                }
                else if (DFMSheetMetal_IrregularDepthExtrudedHoleIssue.CompareType(theIssue))
                {
                    DFMSheetMetal_IrregularDepthExtrudedHoleIssue aIDEHIssue = DFMSheetMetal_IrregularDepthExtrudedHoleIssue.Cast(theIssue);
                    FeatureGroupManager.PrintFeatureParameter("expected min extruded height", aIDEHIssue.ExpectedMinExtrudedHeight(), "mm");
                    FeatureGroupManager.PrintFeatureParameter("expected max extruded height", aIDEHIssue.ExpectedMaxExtrudedHeight(), "mm");
                    FeatureGroupManager.PrintFeatureParameter("actual extruded height", aIDEHIssue.ActualExtrudedHeight(), "mm");
                }
                else if (DFMSheetMetal_IrregularRadiusOpenHemBendIssue.CompareType(theIssue))
                {
                    DFMSheetMetal_IrregularRadiusOpenHemBendIssue aIROHBIssue = DFMSheetMetal_IrregularRadiusOpenHemBendIssue.Cast(theIssue);
                    FeatureGroupManager.PrintFeatureParameter("expected radius", aIROHBIssue.ExpectedRadius(), "mm");
                    FeatureGroupManager.PrintFeatureParameter("actual radius", aIROHBIssue.ActualRadius(), "mm");
                }
                else if (DFMSheetMetal_IrregularSizeBendReliefIssue.CompareType(theIssue))
                {
                    DFMSheetMetal_IrregularSizeBendReliefIssue aISBRIssue = DFMSheetMetal_IrregularSizeBendReliefIssue.Cast(theIssue);
                    SheetMetal_BendRelief anExpectedRelief = aISBRIssue.ExpectedMinBendRelief();
                    SheetMetal_BendRelief aFirstActualRelief = aISBRIssue.FirstActualRelief();
                    SheetMetal_BendRelief aSecondActualRelief = aISBRIssue.SecondActualRelief();
                    FeatureGroupManager.PrintFeatureParameter(
                        "expected min relief size (LxW)",
                        new Pair(anExpectedRelief.Length(), anExpectedRelief.Width()),
                        "mm");
                    if (!aFirstActualRelief.IsNull() && !aSecondActualRelief.IsNull())
                    {
                        FeatureGroupManager.PrintFeatureParameter(
                            "first actual relief size (LxW)",
                            new Pair(aFirstActualRelief.Length(), aFirstActualRelief.Width()),
                            "mm");
                        FeatureGroupManager.PrintFeatureParameter(
                            "second actual relief size (LxW)",
                            new Pair(aSecondActualRelief.Length(), aSecondActualRelief.Width()),
                            "mm");
                    }
                    else if (aFirstActualRelief.IsNull())
                    {
                        FeatureGroupManager.PrintFeatureParameter(
                            "actual relief size (LxW)",
                            new Pair(aSecondActualRelief.Length(), aSecondActualRelief.Width()),
                            "mm");
                    }
                    else
                    {
                        FeatureGroupManager.PrintFeatureParameter(
                            "actual relief size (LxW)",
                            new Pair(aFirstActualRelief.Length(), aFirstActualRelief.Width()),
                            "mm");
                    }
                }
                else if (DFMSheetMetal_LargeDepthBeadIssue.CompareType(theIssue))
                {
                    DFMSheetMetal_LargeDepthBeadIssue anIssue = DFMSheetMetal_LargeDepthBeadIssue.Cast(theIssue);
                    FeatureGroupManager.PrintFeatureParameter("expected max depth", anIssue.ExpectedMaxDepth(), "mm");
                    FeatureGroupManager.PrintFeatureParameter("actual depth", anIssue.ActualDepth(), "mm");
                }
                else if (DFMSheetMetal_LargeDepthCountersinkIssue.CompareType(theIssue))
                {
                    DFMSheetMetal_LargeDepthCountersinkIssue anIssue = DFMSheetMetal_LargeDepthCountersinkIssue.Cast(theIssue);
                    FeatureGroupManager.PrintFeatureParameter("expected max depth", anIssue.ExpectedMaxDepth(), "mm");
                    FeatureGroupManager.PrintFeatureParameter("actual depth", anIssue.ActualDepth(), "mm");
                }
                else if (DFMSheetMetal_NarrowCutoutIssue.CompareType(theIssue))
                {
                    DFMSheetMetal_NarrowCutoutIssue anIssue = DFMSheetMetal_NarrowCutoutIssue.Cast(theIssue);
                    FeatureGroupManager.PrintFeatureParameter("expected min width", anIssue.ExpectedMinWidth(), "mm");
                    FeatureGroupManager.PrintFeatureParameter("actual width", anIssue.ActualWidth(), "mm");
                }
                else if (DFMSheetMetal_SmallDepthLouverIssue.CompareType(theIssue))
                {
                    DFMSheetMetal_SmallDepthLouverIssue aSDLIssue = DFMSheetMetal_SmallDepthLouverIssue.Cast(theIssue);
                    FeatureGroupManager.PrintFeatureParameter("expected min depth", aSDLIssue.ExpectedMinDepth(), "mm");
                    FeatureGroupManager.PrintFeatureParameter("actual depth", aSDLIssue.ActualDepth(), "mm");
                }
                else if (DFMSheetMetal_InconsistentRadiusBendIssue.CompareType(theIssue))
                {
                    DFMSheetMetal_InconsistentRadiusBendIssue aIRBIssue = DFMSheetMetal_InconsistentRadiusBendIssue.Cast(theIssue);
                    FeatureGroupManager.PrintFeatureParameter("expected max radius", aIRBIssue.ExpectedRadius(), "mm");
                    FeatureGroupManager.PrintFeatureParameter("actual radius", aIRBIssue.ActualRadius(), "mm");
                }
                else if (DFMSheetMetal_SmallLengthFlangeIssue.CompareType(theIssue))
                {
                    DFMSheetMetal_SmallLengthFlangeIssue aSLFIssue = DFMSheetMetal_SmallLengthFlangeIssue.Cast(theIssue);
                    FeatureGroupManager.PrintFeatureParameter("expected min length", aSLFIssue.ExpectedMinLength(), "mm");
                    FeatureGroupManager.PrintFeatureParameter("actual length", aSLFIssue.ActualLength(), "mm");
                }
                else if (DFMSheetMetal_SmallLengthHemBendFlangeIssue.CompareType(theIssue))
                {
                    DFMSheetMetal_SmallLengthHemBendFlangeIssue aSLHBFIssue = DFMSheetMetal_SmallLengthHemBendFlangeIssue.Cast(theIssue);
                    FeatureGroupManager.PrintFeatureParameter("expected min length", aSLHBFIssue.ExpectedMinLength(), "mm");
                    FeatureGroupManager.PrintFeatureParameter("actual length", aSLHBFIssue.ActualLength(), "mm");
                }
                else if (DFMSheetMetal_IrregularSizeNotchIssue.CompareType(theIssue))
                {
                    DFMSheetMetal_IrregularSizeNotchIssue aISNIssue = DFMSheetMetal_IrregularSizeNotchIssue.Cast(theIssue);
                    FeatureGroupManager.PrintFeatureParameter(
                        "expected size (LxW)",
                        new Pair(aISNIssue.ExpectedLength(), aISNIssue.ExpectedWidth()),
                        "mm");
                    FeatureGroupManager.PrintFeatureParameter(
                        "actual size (LxW)",
                        new Pair(aISNIssue.ActualLength(), aISNIssue.ActualWidth()),
                        "mm");
                }
                else if (DFMSheetMetal_IrregularSizeTabIssue.CompareType(theIssue))
                {
                    DFMSheetMetal_IrregularSizeTabIssue aISTIssue = DFMSheetMetal_IrregularSizeTabIssue.Cast(theIssue);
                    FeatureGroupManager.PrintFeatureParameter(
                        "expected size (LxW)",
                        new Pair(aISTIssue.ExpectedLength(), aISTIssue.ExpectedWidth()),
                        "mm");
                    FeatureGroupManager.PrintFeatureParameter(
                        "actual size (LxW)",
                        new Pair(aISTIssue.ActualLength(), aISTIssue.ActualWidth()),
                        "mm");
                }
                else if (DFMSheetMetal_NonStandardSheetThicknessIssue.CompareType(theIssue))
                {
                    DFMSheetMetal_NonStandardSheetThicknessIssue aNSSTIssue = DFMSheetMetal_NonStandardSheetThicknessIssue.Cast(theIssue);
                    FeatureGroupManager.PrintFeatureParameter(
                        "nearest standard sheet thickness", aNSSTIssue.NearestStandardSheetThickness(), "mm");
                    FeatureGroupManager.PrintFeatureParameter(
                        "actual sheet thickness", aNSSTIssue.ActualSheetThickness(), "mm");
                }
                else if (DFMSheetMetal_NonStandardSheetSizeIssue.CompareType(theIssue))
                {
                    DFMSheetMetal_NonStandardSheetSizeIssue aNSSSIssue = DFMSheetMetal_NonStandardSheetSizeIssue.Cast(theIssue);
                    DFMSheetMetal_SheetSize aNearestStandardSize = aNSSSIssue.NearestStandardSheetSize();
                    DFMSheetMetal_SheetSize anActualSize = aNSSSIssue.ActualSheetSize();
                    FeatureGroupManager.PrintFeatureParameter(
                        "nearest standard sheet size (LxW)",
                        new Pair(aNearestStandardSize.Length(), aNearestStandardSize.Width()),
                        "mm");
                    FeatureGroupManager.PrintFeatureParameter(
                        "actual sheet size (LxW)",
                        new Pair(anActualSize.Length(), anActualSize.Width()),
                        "mm");
                }
            };
            aManager.Print("issues", PrintFeatureParameters);
        }
 
        static string SmallDistanceIssueName(DFMSheetMetal_SmallDistanceBetweenFeaturesIssue theIssue)
        {
            if (DFMSheetMetal_SmallDistanceBetweenBendAndLouverIssue.CompareType(theIssue))
            {
                return "Small Distance Between Bend And Louver Issue(s)";
            }
            else if (DFMSheetMetal_SmallDistanceBetweenExtrudedHoleAndBendIssue.CompareType(theIssue))
            {
                return "Small Distance Between Extruded Hole And Bend Issue(s)";
            }
            else if (DFMSheetMetal_SmallDistanceBetweenExtrudedHoleAndEdgeIssue.CompareType(theIssue))
            {
                return "Small Distance Between Extruded Hole And Edge Issue(s)";
            }
            else if (DFMSheetMetal_SmallDistanceBetweenExtrudedHolesIssue.CompareType(theIssue))
            {
                return "Small Distance Between Extruded Holes Issue(s)";
            }
            else if (DFMSheetMetal_SmallDistanceBetweenHoleAndBendIssue.CompareType(theIssue))
            {
                return "Small Distance Between Hole And Bend Issue(s)";
            }
            else if (DFMSheetMetal_SmallDistanceBetweenHoleAndCutoutIssue.CompareType(theIssue))
            {
                return "Small Distance Between Hole And Cutout Issue(s)";
            }
            else if (DFMSheetMetal_SmallDistanceBetweenHoleAndEdgeIssue.CompareType(theIssue))
            {
                return "Small Distance Between Hole And Edge Issue(s)";
            }
            else if (DFMSheetMetal_SmallDistanceBetweenHoleAndLouverIssue.CompareType(theIssue))
            {
                return "Small Distance Between Hole And Louver Issue(s)";
            }
            else if (DFMSheetMetal_SmallDistanceBetweenHoleAndNotchIssue.CompareType(theIssue))
            {
                return "Small Distance Between Hole And Notch Issue(s)";
            }
            else if (DFMSheetMetal_SmallDistanceBetweenHolesIssue.CompareType(theIssue))
            {
                return "Small Distance Between Holes Issue(s)";
            }
            else if (DFMSheetMetal_SmallDistanceBetweenNotchAndBendIssue.CompareType(theIssue))
            {
                return "Small Distance Between Notch And Bend Issue(s)";
            }
            else if (DFMSheetMetal_SmallDistanceBetweenNotchesIssue.CompareType(theIssue))
            {
                return "Small Distance Between Notches Issue(s)";
            }
            else if (DFMSheetMetal_SmallDistanceBetweenTabsIssue.CompareType(theIssue))
            {
                return "Small Distance Between Tabs Issue(s)";
            }
            return "Small Distance Between Feature(s)";
        }
 
        static double ToDegrees(double theAngleRad)
        {
            return theAngleRad * 180 / Math.PI;
        }
    }
}